Get a Quote from Smiths Advanced Metals
Previous Previous

You are here: Home page Media Downloads Datasheets Alloy & Stainless


Alloy & Stainless Datasheets


Alloy & Stainless Datasheets 36 individual PDF documents available for viewing or download relating to our Alloy & Stainless Steel range of metal products

To view any of the files the file click on the PDF icon. To save the file without viewing, 'right click' then click 'save target as'.

We recommend the Adobe Acrobat reader with can downloaded and installed free of charge from the Adobe website at www.adobe.com

Pick a Datasheet Category:

Aluminium Alloy & Stainless Steel Titanium Nickel Alloys Yellow Metals



View / Download Alloy & Stainless Steel Datasheets:


■  AMS 5629 (13/8 PH VAR)

Precipitation Hardening Stainless Steel Bar. American aerospace grade, vacuum arc remelted (type XM-13). Very high strength/toughness with good corrosion resistance. For aircraft structural components and use in petrochemical industry.
34 kb ■  Download
■  AMS 5659 (15/5 PH VAR/ESR)

Precipitation Hardening Stainless Steel Bar. American aerospace grade, vacuum arc remelted or electro-slag refined (type XM-12). High strength/toughness with good corrosion resistance. For aircraft/missile construction, chemical process equipment and nuclear reactor components.
35 kb ■  Download
■  AMS 5643 (17/4 PH)

Precipitation Hardening Stainless Steel Bar. American aerospace grade (type 630). High strength/toughness, good corrosion resistance and high fatigue resistance. For aerospace equipment and missile components. Commercial grade used in oil and gas.
kb ■  Download
■  BS 2S143

Precipitation Hardening Stainless Steel. British aerospace grade as bar and forgings (FV520B type). High strength with moderate/good corrosion resistance. For mechanical components in aerospace and defence.
39 kb ■  Download
■  AMS 6346 (4130)

Chromium-Molybdenum Alloy Steel Bar. American aerospace grade. Through hardenable type 4130 steel. Widely used due to combination of weldability and ease of fabrication. For aerospace and defence components - commercial grade of this type used in Oil & Gas.
34 kb ■  Download
■  AMS 6349 (4140)

Chromium-Molybdenum Alloy Steel Bar. American aerospace grade. Through hardenable type 4140 steel with high hardness, toughness and fatigue resistance. For aerospace and defence components - commercial grade of this type used in Oil & Gas.
34 kb ■  Download
■  AMS 6484 (4340)

Chromium-Nickel-Molybdenum Steel Bar. American aerospace grade. Through hardenable type 4340 steel with very high ductility and toughness. For aerospace and defence components - commercial grade of this type used in Oil & Gas.
34 kb ■  Download
■  BS 5 S80 D

Stainless Steel Bar. British Standard aerospace grade. Good strength 431 type steel with fair corrosion resistance. For aerospace and defence components.
83 kb ■  Download
■  BS 2 S130 D (Bright)

Stainless Steel Bar. British Standard aerospace grade. Moderate strength niobium stabilised steel (347 type) with moderate corrosion resistance. For aerospace and defence components.
83 kb ■  Download
■  FERRINOX 255®

Super Duplex Stainless Steel. High performance 25% chromium super duplex (austenitic/ferritic) steel with 1.75% copper (UNS S32550/1.4507/F61). Good strength/ductility combined with high resistance to all forms of corrosion. For Oil & Gas, defence, nuclear, chemical/petrochemical and marine applications.
100 kb ■  Download
■  AMINOX 255®

Super Duplex Stainless Steel. High performance, high strength 25% chromium super duplex (austenitic/ferritic) steel strands and wire ropes with outstanding corrosion resistance. For swimming pool flume/ducting supports, mast rigging, mooring and architectural supports.
126 kb ■  Download
■  AMINOX 255® (WIRE LINES)

Super Duplex Stainless Steel. High performance, high strength 25% chromium super duplex (austenitic/ferritic) steel strands and wire ropes with outstanding corrosion resistance. Data Sheet specifically for Oil & Gas industry applications.
40 kb ■  Download
■  UNS S32760 / 1.4501 / F55

Super Duplex Stainless Steel. 25% chromium super duplex (austenitic/ferritic) steel (also known as ZERON 100) with 0.75% tungsten and copper. Good strength/ductility combined with high corrosion resistance. For Oil & Gas, defence, pollution control, chemical/petrochemical and marine applications.
88 kb ■  Download
■  UNS S31254 / 1.4547 / F44

Super Austenitic Stainless Steel. High alloy (6% molybdenum) austenitic steel with good strength and excellent marine and industrial media corrosion resistance. For Oil & Gas, marine and industrial applications.
87 kb ■  Download
■  UNS S31803 / 1.4462 / F51

Duplex Stainless Steel. 22% chromium duplex (austenitic/ferritic) steel (2205 type) with moderate/good strength and good general corrosion/ stress corrosion cracking resistance. For Oil & Gas, brewing, power generation and chemical industry applications.
87 kb ■  Download
■  UNS S32750 / 1.4410 / F53

Super Duplex Stainless Steel. 25% chromium copper-free super duplex (austenitic/ferritic) steel (also known as SAF 2507). Good strength/ductility combined with high marine corrosion resistance. Primarily for Oil & Gas and marine applications.
88 kb ■  Download
■  OvaX 200

Air hardening steel designed for case hardening, nitriding or quenching. For applications requiring high cleanliness (low inclusion content) and isotropic properties (same in all directions).
578 kb ■  Download
■  OvaX 300

An ingot cast high tensile quench and tempering steel with very high strength and toughness. An excellent choice for shafts and machine components.
275 kb ■  Download
■  OvaX 600

Through hardening steel designed for air hardening and gas quenching. For applications requiring high cleanliness (low inclusion content) and isotropic properties (same in all directions).
455 kb ■  Download
■  OvaX 800

Through hardening steel (100Cr6 type) designed for applications where high cleanliness (low inclusion content) and isotropic properties (same in all directions) are demanded. Extremely low sulphur to remove number of elongated sulphides.
465 kb ■  Download
■  UNS S20910 / XM-19

Austenitic stainless steel. Highly alloyed stainless steel (also known as NITRONIC 50) combining good strength and high corrosion resistance. For boat shafting / rigging, Oil & Gas and nuclear plant.
36 kb ■  Download
■  UNS S21800

Austenitic stainless steel. Highly alloyed stainless steel (also known as NITRONIC 60) combining good strength and corrosion resistance with excellent resistance to galling and wear. For valve and pump components, shafting in compressors and boats and chain-drive systems.
83 kb ■  Download
■  Grade C250

Maraging steel. Highly alloyed (cobalt containing), vacuum arc remelted steel combining very high strength (250 ksi tensile) with above average toughness levels and moderate/good corrosion resistance. For missile casings, tooling, ordnance mounting blocks, jet engine/helicopter drive shafts and high performance autosport components.
38 kb ■  Download
■  Grade C300

Maraging steel. Highly alloyed (cobalt containing), vacuum arc remelted steel combining very high strength (300 ksi tensile) with above average toughness levels and moderate/good corrosion resistance. For missile casings, tooling, ordnance breach blocks and high performance autosport components.
37 kb ■  Download
■  BS S155

Steel bar and forgings. British Standard aerospace grade. Vacuum arc remelted through hardenable steel. For aircraft engineering, defence and autosport components.
34 kb ■  Download
■  BS S156

Steel bar and forgings. British Standard aerospace grade. Vacuum arc remelted case hardening steel. For aircraft engineering, defence and autosport components.
34 kb ■  Download
■  BS S132

Nitriding steel. British Standard aerospace grade. Offers high strength (1320 to 1470MPa tensile) and develops a hard wear resistant case after surface treatment. For gearbox shafts and crankshafts.
43 kb ■  Download
■  BS S82

Case-hardening steel (4% Ni-Cr-Mo). British Standard aerospace grade. Tensile strength 1320 to 1520 MPa. For aircraft engineering and high performance autosport components.
43 kb ■  Download
■  32 CDV 13

Low alloy nitriding steel. French aeronautical specification in AIR 9160. Tensile strength up to over 1300 MPa and capable of nitriding to produce a very high surface hardness. For high strength mechanical engineering parts.
118 kb ■  Download
■  AMINOX-AS-1®

Machinable type 316L stainless steel bar. High grade, closely controlled composition austenitic stainless steel chosen for optimum machinabilty, weldability and service performance. For Oil & Gas, chemical/petrochemical plant and general engineering.
87 kb ■  Download
■  Ovax 200 - Case Carburising Bearings

Air hardening steel designed for case hardening, nitriding or quenching. For applications requiring high cleanliness (low inclusion content) and isotropic properties (same in all directions).
578 kb ■  Download
■  Ovax 600 - Through Hardened Bearings

Through hardening steel designed for air hardening and gas quenching. For applications requiring high cleanliness (low inclusion content) and isotropic properties (same in all directions).
455 kb ■  Download
■  Ovax 800 - Through Hardened Bearings

Through hardening steel (100Cr6 type) designed for applications where high cleanliness (low inclusion content) and isotropic properties (same in all directions) are demanded. Extremely low sulphur to remove number of elongated sulphides.
465 kb ■  Download
■  Ovax 200 - Nitriding Camshafts

Air hardening steel designed for case hardening, nitriding or quenching. For applications requiring high cleanliness (low inclusion content) and isotropic properties (same in all directions).
109 kb ■  Download
■  Ovax 200 - Nitriding Crankshafts

Air hardening steel designed for case hardening, nitriding or quenching. For applications requiring high cleanliness (low inclusion content) and isotropic properties (same in all directions).
109 kb ■  Download
■  Ovax 200 - Case Carburising Gears & Shafts

Air hardening steel designed for case hardening, nitriding or quenching. For applications requiring high cleanliness (low inclusion content) and isotropic properties (same in all directions).
71 kb ■  Download
■  Ovax 200 - Nitriding Gears & Shafts

Air hardening steel designed for case hardening, nitriding or quenching. For applications requiring high cleanliness (low inclusion content) and isotropic properties (same in all directions).
99 kb ■  Download
■  Ovax 200 - Through Hardened Gears & Shafts

Air hardening steel designed for case hardening, nitriding or quenching. For applications requiring high cleanliness (low inclusion content) and isotropic properties (same in all directions).
45 kb ■  Download
■  Ovax 600 - Through Hardened Gears & Shafts

Through hardening steel designed for air hardening and gas quenching. For applications requiring high cleanliness (low inclusion content) and isotropic properties (same in all directions).
46 kb ■  Download


For more information about Smiths Advanced Metals and to receive a competitive quotation for your business, please  CLICK HERE  to contact us.














Latest News

Why are we different?

Callback Request



Head Office:

Smiths Advanced Metals
Stratton Business Park,
London Road,
Biggleswade,
Bedfordshire SG18 8QB

t: +44 (0) 1767 604710
f: +44 (0) 1767 315340

e:info@smithsadvanced.com
w:www.smithsadvanced.com